Ard-Beachtais ER Milling Chuck Set
Is sraith chuck collet ard-chruinneas é tacar chuck muilleoireachta ER, tá na collets ualach earraigh, ionas gur féidir leo greim a fháil ar raon méideanna.Tá an sraith chuck seo foirfe le húsáid le muilte agus meaisíní cruinneas eile.
| Ordú Uimh. | Méid Poll | PCS /SET | |
| orlach | mm | ||
| ER16- 8in(mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6in(mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10in(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6in(mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12in(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8in(mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15in(mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Snáithe Barra Tarraingthe
| Barrchaol de collet chuck | Snáithe barra tarraingthe | |
| R8 | 7/16＂-20UNF | |
| 7:24 30 | M12×1.75 | 1/2＂-13UNC |
| 7:24 40 | M16×2.0 | 5/8＂-11UNC |
| 7:24 50 | M24×3.0 | 1＂-8UNC |
| MS2 | M10×1.5 | 3/8＂-16UNC |
| MS3 | M12×1.75 | 1/2＂-13UNC |
| MS4 | M16×2.0 | 5/8＂-11UNC |
| MS5 | M20×2.5 | 3/4＂-10UNC |
| MS6 | M24×3.0 | 1 ＂ -8UNC |
Cuir in iúl le do thoil snáithe an bharra tarraingthe collet chuck agus sonraíocht na collets (méadrach nó orlach)
Cuir in iúl le do thoil an fad shank díreach agus dia.
Tá áthas orainn collets agus chucks a sholáthar le shank agus méideanna éagsúla de réir do riachtanas.
